Automatic flange to plate MIG/MAG welding tractor auto matic welding carriage welding tractor
Flat flange automatic welding trolleys are widely used in industries such as ships, bridges, locomotives, steel structures, and petrochemicals. Its main advantages include:
1. Reduce labor intensity and improve working environment
2. Improve work efficiency by 1.5 times that of manual welding
3. To avoid poor weld quality caused by human factors, the defect rate of manual operation is generally around 20%, while using automatic welding trolleys does not result in welding defects. Therefore, its comprehensive benefits are improved by nearly 200% compared to manual welding
4. High degree of automation to ensure the stability of welding quality
5. No need for highly skilled technical workers
Features:
1. The I-type welding trolley is an automatic welding device suitable for horizontal flange plate circumferential fillet welding.
2. Small size and light weight, easy to move and install, and unskilled workers can also perform welding
Specification
| Type | Contents | Note |
| Trolly | power | AC 220V | |
| | Size | 275*140*240 | W×L×H |
| | Weight | 15Kg | |
| | Moving | double wheels | |
| | Moving speed | 100-1000mm/min | |
| | Swing motor | DC24V 18RPM | option |
| | welding gun | up/down | 100mm |
| | | forward/back | 100mm |
| | | angle | 360° |
| | | Moving angle | ０° |
| | | | |
| Control | | Swing speed | ０-10ＲＰＭ |
| | | Swing angle | ０-±10° |
| | | Swing time | ０-２S |
| | | Center moving | ０-±８° |
| | | | |
| | | Moving Speed | 100∼1000mm/min |
| | | | |
Connection of the machine
Install
(1) Installation conditions:
1. The necessary tools for welding are the welding power supply and wire feeder device;
2. Welding power supply (AC 220V) for walking and control of KA-C1;
3. CO2 gas tank for welding;
4. Direct welding gun for CO2 automatic welding;
5. Basic tools for other necessary tasks;
(2) System connection method
1. Install the track, which must ensure that the welding direction of the trolley is parallel to the weld seam
2. Install the trolley and use the installation handle to clamp the track wheels of the trolley onto the track
3. Install welding wire on the wire feeder and pull it to the end of the welding gun
4. Connect the welding gun port to the wire feeder
5. Connect the control power cable to the 8P port on the control panel of the car
6. Connect the control power cable to AC 220
Product Tags:
|
|
Flange To Plate MIG / MAG Welding Tractor Automatic Welding Carriage Tractor Images
|
